Rinnai Advance Manuel d'installation télécharger pdf (Page 26)

Rinnai America

FF Models

This manual must be followed exactly.

1) Read the safety issues completely before installing the Rinnai Water Heater.

2) This water heater is suitable for residential water (potable) heating ONLY.

DO NOT use this water heater for space heating, combination space heating/

domestic water heating, or commercial water heating applications.

3) The Rinnai Water Heater is not suitable for use in pool or spa applications.

4) This unit is designed to be installed indoors using the proper vent piping to

exhaust by-products of combustion to the outside environment. Contact your

dealer or Rinnai for proper vent kits. DO NOT operate this unit without vent

piping connected. Exhaust gasses must be expelled outside the home.

5) Maintain proper space around the unit for proper servicing and operation.

Minimum clearances from combustible materials are listed below.

Top of Heater 6 inches

Back of Heater 0 inch

Front of Heater 6 inches

Sides of Heater 2 inches

Floor 12 inches

Vent/Air Intake 0 inches

6) Installer must install a Pressure relief valve. Pipe pressure relief discharge to a

drain or outside environment (See pressure relief valve section).

7) The appliance should be located in an area where leakage of the unit or

connections will not result in damage to the area adjacent to the appliance or

to lower oors of the structure. When such locations cannot be avoided, it is

recommended that a suitable drain pan, adequately drained, be installed under

the appliance. The pan must not restrict combustion air ow.

INSTA L L E R ’ S I NSTA L L AT I O N IN S T R U C T I O N S

-Warnings- (Residential Unit)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 47 48

Pas de commentaire

Rinnai Advance Manuel d'installation Page 26