Rinnai Avenger 25 Plus Instructions d'exploitation télécharger pdf (Page 13)

Rinnai 11 Operation Manual

INSTALLATION

Check room size and ventilation

This heater must not be installed in a room

smaller than:

The AVENGER 25Plus must not be in a room

smaller than 62.5 m

The CAPELLA 18Plus must not be in a room

smaller than 45.0 m

Fixed ventilation must conform to local regulations.

Number and position of vents is for illustrative purposes only. For more information on ventilation,

please refer to our Rinnai Web Site www.rinnai.com.au

DO NOT install in a bedroom or bathroom.

The bayonet plug on the factory fitted flexible hose simply plugs into your bayonet fitting. The control

panel is located on the top of the appliance, basic controls are also located on the remote control.

For the AVENGER - H x W x D must equal or exceed 62.5 m

For example: if room size is L 5.2 m x W 5.0 m x H 2.4 m the volume will be 62.4 m

For the CAPELLA - H x W x D must equal or exceed 45.0 m

For example: if room size is L 4.5 m x W 4.2 m x H 2.4 m the volume will be 45.4 m

This heater must not be installed where

curtains or other combustible materials could

come into contact with it. In some cases

curtains may need restraining.

Other clearances are shown in the diagram.

This heater is not designed to be built in.

Width

Depth

Height

HEAT

50mm

750mm

50mm

The above diagram shows the clearances required

around this heater whilst in operation.

CUSTOMER OPERATING INSTRUCTIONS

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Pas de commentaire

Rinnai Avenger 25 Plus Instructions d'exploitation Page 13