Rinnai RHFE-750ETR Manuel d'installation télécharger pdf (Page 3)

Rinnai 3 RHFE-750ETR Flue Installation Manual

IMPORTANT INFORMATION

The Rinnai Aspiration (RHFE-750ETR) Co-axial flue system is certified as a component of the

Aspiration Flame Fire Heater. Only an Authorised person must install, service and remove the heater

and flue system.

The heater and the flue system shall be installed in accordance with:

• The requirements of AS 5601 'Gas Installations'

• Manufacturers installation instructions

• Local and Municipal building codes

• Any other relevant Statutory Regulation.

The Rinnai Aspiration Flame Fire Heater must be installed with the flue components designated in this

manual. Other components, whether manufactured by Rinnai or otherwise, are not compatible and

must not be used.

This manual must be read in accordance with the Aspiration Power Flued Flame Fire Heater

Operation/Installation manual supplied with the heater.

Rinnai appliance warranty conditions will be voided if non Rinnai flue components are fitted.

2. AVAILABLE CONFIGURATIONS

1 2 3 4 5 6 7 8 ... 31 32

Pas de commentaire

Rinnai RHFE-750ETR Manuel d'installation Page 3