22
Rinnai Corporation RHFE-201FA
Connecting the Appliance
1. Attach the air inlet hose to the flue manifold
on either inlet position a or b .
The unused inlet is plugged with the rubber
cap supplied on the manifold.
2. Connect the flue elbow to the manifold while
moving the appliance into position.
3. Fit the pipe stopper over the connection
between the flue elbow and the manifold.
Engage the hook and rotate it until it snaps
against the body of the clamp.
4. Slide the insulation sleeve up to the flue
manifold and slip the securing clip over the
sleeve as shown.
5. Install the bracket on the rear of the top
spacer by tightening 2 screws.
6. Install the wall bracket with two screws.
Install the top spacer by clipping the spacer
into the wall brackets and attaching it to the
heater with 2 screws.
a
b
Commentaires sur ces manuels